以下僅適用於MKS SBASE控制板
原本:

 
 
temperature_control.hotend.enable            true             # 
temperature_control.hotend.thermistor_pin    0.24             # 
temperature_control.hotend.heater_pin        2.7              # 
temperature_control.hotend.thermistor        RRRF100K         # 
temperature_control.hotend.set_m_code        104              #
temperature_control.hotend.set_and_wait_m_code 109            #
temperature_control.hotend.designator        T                #
改為
 
 
temperature_control.hotend.enable            true             # 
#temperature_control.hotend.thermistor_pin    0.24             # 
temperature_control.hotend.chip_select_pin    0.16
temperature_control.hotend.spi_channel         0    # SPI channel 0 or 1
temperature_control.hotend.heater_pin        2.7              # 
#temperature_control.hotend.thermistor        RRRF100K         # 
temperature_control.hotend.sensor        max31855  
temperature_control.hotend.set_m_code        104              #
temperature_control.hotend.set_and_wait_m_code 109            #
temperature_control.hotend.designator        T                #